CellSync 4-in-1 PEMF Light Mat
A full-length 190 × 80 cm mat that brings four elements together: pulsed electromagnetic fields, 24 red and near-infrared LEDs, carbon-fibre warmth and a layer of natural stones and coloured beads.
£348Was £548
Dispatched within 7 working days, delivered in 7 to 14 working days.
PEMF
A sine-wave magnetic field from 1 to 30 Hz, up to 15 gauss.
24 LEDs
Red light at 660 nm and near-infrared light at 850 nm.
Carbon-fibre warmth
A 36,000-strand carbon-fibre element, adjustable from 25 to 80 °C.
Stone and bead layer
White jade, black-and-white crystal, agate and amethyst, with seven colours of beads.
Full length
190 × 80 cm, with a timer from 5 to 60 minutes.
About this mat
The CellSync 4-in-1 PEMF Light Mat combines PEMF, 24 LEDs at 660 nm (red) and 850 nm (near-infrared), a carbon-fibre far-infrared heating element and a surface of natural stones and coloured beads.
At 190 × 80 cm it is long enough to lie on from head to legs. It runs from the mains, and the controller sets the warmth from 25 to 80 °C, a timer from 5 to 60 minutes and the PEMF from 1 to 30 Hz.
The cover is wipe-clean PU vegan leather. The mat weighs 16 kg, so it stays in place on the floor, and it can also be used as a yoga mat.
How it works
A PEMF layer inside the mat carries a pulsed electrical current, which creates a pulsed magnetic field. The field follows a smooth sine waveform, can be set from 1 to 30 Hz and reaches up to 15 gauss.
A small test ball comes with the mat. Put it on the surface with PEMF switched on and you can see it move with each pulse.
The 24 LEDs combine visible red light at 660 nm with near-infrared light at 850 nm. Near-infrared is almost invisible, so the 850 nm LEDs look unlit or only faintly lit even when they are working. This is normal.
Under the surface, a carbon-fibre heating element warms the mat, with settings from 25 to 80 °C.
More about PEMFHow to use
- 1Lay the mat flat on the floor or another firm, level surface.
- 2Plug it into the mains. There is no battery to charge.
- 3Lie on the mat in light cotton clothing. You can also lie with bare skin on the surface.
- 4Choose the warmth, the PEMF setting and a time between 5 and 60 minutes on the controller.
- 5Use it for 20 to 30 minutes a day.
- 6When you have finished, switch it off and unplug it.
Specifications
- Size
- 190 × 80 cm
- Weight
- 16 kg
- Power
- 300 W
- Input
- 100–240 V AC, 50/60 Hz
- Power source
- Mains (no battery)
- PEMF frequency
- 1–30 Hz
- Magnetic field strength
- Up to 15 gauss
- Waveform
- Sine
- LEDs
- 24, at 660 nm and 850 nm
- Heating
- Carbon-fibre far-infrared element
- Heat settings
- 25–80 °C
- Timer
- 5–60 minutes
- Gemstones
- White jade, black-and-white crystal, agate, amethyst
- Beads
- Seven colours
- Cover
- PU vegan leather
- Non-slip backing
- No
- Included
- PEMF test ball
Construction
Care and storage
- Switch the mat off and let it cool before cleaning.
- Wipe the surface with a soft, slightly damp cloth.
Safety information
Do not use the mat if:
- You have an implanted electronic device, such as a pacemaker, ICD or insulin pump.
- You are pregnant.
- You have active bleeding, an acute injury or a surgical wound that has not healed.
- You have a high fever, acute inflammation, epilepsy or active cancer.
Also note
- Children under 12 should not use the mat on their own.
- The mat is for use at home and is not a medical device. It does not replace medical treatment or medicines. If you have a long-term health condition, talk to your doctor before using it.